66 Inch Classic Clawfoot Tub - Hand Painted American Flag - Wall Faucet Drilling - Vintage Tub & Bath Vintage Tub and Bath offers this beautiful hand painted 66" Classic Style Porcelain over Cast Iron Roll Top Clawfoot Tub. Complete with its vintage style ball and claw feet, this tub comes predrilled with 3-3/8" wall faucet drillings for use with a bathtub wall mount faucet or shower enclosure. The exterior of the tub is not a decal; this one of a kind tub is hand painted like an American Flag with vibrant red and blue paints (additional photos available upon request). It offers an 11.4" water depth with a 56 gallon water capacity and measures 66-1/2" long, 30" wide, stands 24-1/2" tall and weighs 376 pounds. Vintage Tub and Bath offers a lifetime limited warranty on this tub. Manufactured in China; painted in-house. If you have any questions please call us toll free at 877-868-1369. Buy Now
	Clawfoot Tub Feet - Hand Cast Reproduction - Silicon Bronze Just send us your original foot and we can make copies out of silicon bronze for $98 a foot. Some large or difficult to cast feet may be slightly more expensive. The silicon bronze is stronger than cast iron, won't rust and is easier to pour than cast iron. We will send it to you with a wirebrushed cast bronze finish. For an extra charge, we can plate, prime or paint your feet to your specifications. Buy Now
	Porcelain Repair Kit for Clawfoot Tubs - Porc-a-fix This product is recommended to repair small chips or dents. The Porc-A-Fix Kit includes both the porcelain filler and the porcelain touch up glaze to fix your damaged area. This kit is to touch up interior damage to your bathtub. We also offer touch up glaze for the exterior of your bathtub. Example of damaged area. Before applying the filler make sure to remove any loose particles. Chipped porcelain is very sharp so please be very careful not to use your hands when removing any loose particles. Clean the area and make sure it is completely dry. Avoid cleaners that leave oily or soapy residue. The manufacturer recommends using acetone. Make sure to shake the filler well before opening. Apply the filler using a putty knife or spatula slightly overlapping the damaged area. Allow for 15-30 minutes drying time. Sand the area with 220 grit or smoother sand paper until flush with the undamaged porcelain. Avoid sanding into the undamaged area to prevent scratches. If repair is not satisfactory you can always reapply Porc-a-filler and sand until it is acceptable. When your repair is complete make sure to clean and dry the area. You are now ready to apply the touch up paint. When applying the paint just remember that several lighter coats are better than one heavy coat.

Copyright © Best Price Bath All rights reserved.